EggXpert.com

How much have you overclocked you processor who overclockes the most what is your processor

don't lie you can't f o o l us with 50,000mhz  and 60 volts

had to use wierd spacing on f o o l eggxpert thinks it's suposed to be

I run a 939pin FX-55(2.6) thats been sitting at 2.8 on air for almost two years with no problems,Maxed it at 2.93.  Also just got a 5000be(2.6) iv had over 3.2, still playing with that one. Dont like going max constant- but i do run about 3/4 max oc for as long as i own them. So thats not going to take any records. But im guessing we will all read some "interesting" results on this subject. 

deadpeddle:

I run a 939pin FX-55(2.6) thats been sitting at 2.8 on air for almost two years with no problems,Maxed it at 2.93.  Also just got a 5000be(2.6) iv had over 3.2, still playing with that one. Dont like going max constant- but i do run about 3/4 max oc for as long as i own them. So thats not going to take any records. But im guessing we will all read some "interesting" results on this subject. 

I have an AMD Athlon 64 X2 4800 toledo core 939 socket 2.4GHz.

I usually run it at 2,600,000,000 Hz lately, but I used to run it at 2,880,400,000 Hz all the time. (had to bolt an extra fan onto the back of my Zaleman to get it that high stable n cool)

 I haven't been able to get it certified on my Dial-up connection.

---

"Currentley" running my AMD FX-57 (2.8 stock) @ 3.0 (12 x 250); V-Core @ 1.425; HT Bus @ 1,000 (4 x 250). RAM @ 333Hz (166 setting), reading a total of 415Hz (2.5-3-2-6).

I have been using theses settings for about 2 weeks now without issues. So far these settings have given me the smoothest performance and the highest 3DMark06 score of 5,717 (running res @ 1920 x 1200 on a 23" screen).

I have gotten this CPU up to 3.1 but had a few issues with it making it through 3DMark06. I ended up working back down to where I'm at now, just trying to be a little safe. Overall this isn't too bad on air.

i run stock period. ive never had a home built machine fail on me and they run cool and quiet in stock.

no o/c - the waste of power and noise just arent worth the few hundredeths of a percent increase in speed. your processing power goes up by a few percentage points and your hardware ages 25% faster... no thank you. i prefer my machines to last 3-4 years before they get replaced due to lack of speed rather than catastrophic failure.

zurktech:

i run stock period. ive never had a home built machine fail on me and they run cool and quiet in stock.

no o/c - the waste of power and noise just arent worth the few hundredeths of a percent increase in speed. your processing power goes up by a few percentage points and your hardware ages 25% faster... no thank you. i prefer my machines to last 3-4 years before they get replaced due to lack of speed rather than catastrophic failure.

 

 

Booooooooooooooo!

Hisssssssssssssss!

Party pooper, lol             I've been running mine over 3 years now, frankly it'll be outdated before it will stop working. 

---

CPU-Z Database (ID : 273371)
Submitted by mars black
Submitted on Mon, 26 Nov 2007 04:50:25 +0100 with CPU-Z 1.42
CPU : Intel Core 2 Duo E6600 (*1)
CPU Arch : 2 Cores - 2 Threads
CPU PSN : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
CPU EXT : MMX SSE SSE2 SSE3 SSSE3 EM64T
CPU Cache : L1 : 2 x 32/2 x 32 KB - L2 : 4096 KB
Core : Conroe (65 nm) / Revision : B2
CPUID : 6.F.6 / Extended : 6.F
Freq : 3300.37 MHz (366.71 * 9)
----------------------------------
MB Brand : ASUSTeK Computer INC.
MB Model : P5N32-E SLI
NB : NVIDIA nForce 680i SLI SPP rev A2
SB : NVIDIA nForce 680i SLI MCP rev A2
----------------------------------
RAM Size : 2048 MB
RAM Freq : 400 MHz
RAM Type : DDR2-SDRAM Dual Channel RAM
Ratio : 11:12
RAM Timings : 4-4-4-12
----------------------------------
Slot 1 : 1024MB (PC2-6400)
Slot 1 Manufacturer : Kingston
Slot 2 : 1024MB (PC2-6400)
Slot 2 Manufacturer : Kingston

that's it for now.  vcore: 1.35v, nb: 1.35v, sb: 1.50v, ram: 2.00v

may open up the memory a bit sometime soon, i don't think i will push the cpu much further.

GmsCool:

zurktech:

i run stock period. ive never had a home built machine fail on me and they run cool and quiet in stock.

no o/c - the waste of power and noise just arent worth the few hundredeths of a percent increase in speed. your processing power goes up by a few percentage points and your hardware ages 25% faster... no thank you. i prefer my machines to last 3-4 years before they get replaced due to lack of speed rather than catastrophic failure.

Booooooooooooooo!

Hisssssssssssssss!

Party pooper, lol             I've been running mine over 3 years now, frankly it'll be outdated before it will stop working. 

I couldn’t have said it any better.  Some people just don’t get it I guess.

First;  it’s more than a “few hundredths” of percent, if you do it right.

Second;  if you have good cooling and don’t get stupid with your settings your components will last until they are outdated.

Third; “waste of power”, If you have a good power supply with plenty of power who cares. What are you going to save it for a rainy day,  or perhaps trade it in for some plasma, or nuclear power or....

Fourth; “Noise”, what noise. I got out my stethoscope and couldn’t find any.

OK, now I'm getting bored... 

Very nice on those Quads :)

Very impressive my friends!!! I ended up settling on the 6000+ x2 and as many may know, its maxed already and not even worth OCing. I do have an old 3000+ 939 clicking at 2.5 though, and its solid. Saying that, my next chip will indeed have some room to waste some power for some insignificant performance gain. Man I wish I got an Opty or that 5000+!!

Penewah! 

No, i would totally think about a quad core right now b/c price/performance, you cant match and prices are not going to go down until 2009 so you might as well spend the money now and have the power, 80-150$ spent now will last 2 yrs vs the 125$ now plus the 125$ next year and you have the same performance now vs later on down the road and your still spending the same amount of money, i just spent mine now and im doubling the work your doing for a year or so on your rig.

Intel C2D E4300 stock 1.8Ghz

OC to 3.02 Ghz

FSB 1333 from 800 no voltage increase.

---

Stealing another guy's videos is like having the guy piss on a bush while you catch the piss in your mouth and procede to piss it back out on the same bush.

MoneyMike:

The other day I overclocked my two year old AMD 3200+ from 2.20Ghz to 2.32Ghz...I didn't want to go any higher because I have read online that they become unstable at 2.34Ghz

What socket is that? I had my old 3200+ Barton core up at 2.6GHz forever, I just needed a Monster fan to cool it. 

---

Q6600 @ 3ghz, 1333FSB.

I haven't cpuz verified it.  I haven't even stress test it for errors yet. 

---

</A/>